MADRIX NEBULA
Article details
- MADRIX NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
- It is an advanced SPI converter and LED pixel tape driver
- Additional LED types will be supported with future firmware updates
- Drives up to 1360 RGB pixels (8 DMX universes / 4096 DMX Channels / 4096 single-color pixels / 1024 RGBW pixels) distributed equally over 2 ports
- Supports a signal frequency of up to 24 MHz
- The output protocol can be set separately for each of the 2 ports
- Directly connects to the LEDs via 4-pin screw terminals
- Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V / 12 A) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX NEBULA
- Receives data over Ethernet network (Art-Net and/or Streaming ACN)
- Can also be used as MADRIX USB interface
- Works great with the MADRIX Software (sold separately) with quick and easy installation
- Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
- Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
- Automatic HTP merging for two Art-Net sources
- 2 Ethernet ports with daisy chain support for the data connection without using a separate network switch or router
- Useful settings for channels per universe, start channel, channel order, and output in case of connection loss, and more
- 9 status LEDs, which can be turned off
- Built-in web page for simple on-device configuration
- Can be mounted on 35 mm DIN rails or walls via the provided wall mount brackets
- Non-conductive enclosure with IP20 and UL94 V-O flammability rating
- Fanless, noiseless, and low-energy design
- Ready within seconds after startup
- Recommended for any small or large project
- Multiple devices can be used together without problems
- The firmware is upgradable for future features
- Quick start guide / technical manual available in English and German
- User manuals also available at help.madrix.com
- Made in Germany
- More information available at www.madrix.com
- Power supply of device: Mains Input Socket (M) fehlt provided
Chipset:
WS2811, TM1814, WS2812b, WS2812, WS2801, TLS3001, SM16716, APA104, MBI6020, LPD6803, SK6812, APA102, TLS3008, WS2803, UCS1903, TM1829, LPD1882, LPD8806, TM1812, TM1809, TM1804, APA101, APA106, GW6201, GW6205, P9883, SJ1221, SK6822, SM16703, UCS512B3, UCS8904, UCS9812S, WS2811S, WS2813, WS2815, WS2818, WS2822S, WS2822S Addressing
Current voltage:
- Advertising displays
- Control of Christmas lights
- AmbiLight
- Club lights
- Stage light
- 1 Controller
Currently the following pixels are supported:
APA101 / APA102 / APA104 / APA106 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6120 / P9883 / SJ1221 / SK6812 / SK6822 / SM16703 / SM16716 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS512B3, UCS8904, UCS9812S, WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing (As of July 2018)