MegaTree Mounting Strip for 12mm RGB-Pixel/RGB-Dumb-Pixel 3" (black)

Item number: MTS-1002-01

Category: Pixel Tree (Mega Tree)

The Boscoyo Studio MegaTree Mounting Strips are specially designed for our RGB-Pixel/RGB-Dump-Pixel.

The distance between the mounting holes is evenly 7.62 cm (3 ").

The Boscoyo Studio MegaTree Mounting Strips make it easy for you to build a MegaTree cleanly and easily. You do not have to measure distances for hours and drill holes in expensive PVC pipes. With the Boscoyo Studio MegaTree Mounting Strips, just click our RGB-Pixel/RGB-Dumb-Pixel into the mounting holes and you're done. So you can finish a 50er pixel chain in 1-2 minutes.

The Boscoyo Studio MegaTree Mounting Strips have been successfully tested by the manufacturer in the cold winters of the northern United States and Canada as well as in the extreme heat of Australia.

You can extend multiple MegaTree Mounting Strips with cable ties to any length. For this purpose, special holes are attached at each end.

At the end of the season, you can simply roll up the strips (even with the pixels installed). Simply store the strips in a plastic bag or hang the strips on a wall.

Reinforce the ends with our fastening clips.

Show description 
Differential price
From 50 piece » 2,89 € 1,19 € per m
From 100 piece » 2,79 € 1,15 € per m
From 150 piece » 2,69 € 1,11 € per m
2,99 €
1,23 € per 1 m

including 19% VAT., plus shipping (Standard)

piece
Available now! (1 - 4 workdays)

Technical details:

  •   Total mounting holes: 32
  •   Length: 242.57cm (95.5")
  •   material thickness: 0.9652mm (0.038")
  •   Distance mounting holes: center 7.62cm (3")
  •   storage: rolled
  •   colour: black
  •   material: HDPE Plastic
color:
Contents:
242,57 cm
  •   Advertising displays
  •   Control of Christmas lights
  •   AmbiLight
  •   Club lights
  •   Stage light
  •   1 mounting strips (without LED)

 0  Ratings

Write your first review and help others with their purchase decision: