PixLite Long Range Receiver

Item number: LCO-1052-01

Category: Pixel LED Controller

With this receiver unit, you can control two outputs of the PixLite 16 Long Range MkII controller. The unit converts the signals so that you can connect and operate the pixels to the unit. Using this unit in conjunction with the PixLite 16 Long Range MkII allows you to position your pixels in different locations.

The signal from the PixLite 16 Long Range MkII controller (not included) to the pixels is converted to this receiver unit and output.

You can use standard Cat5/6 cables to transmit the signals (not included).
The receiver unit can be operated in two modes:

Mode 1:
Normal - Each receiver operates two pixel outputs. Each of these two outputs is capable of driving 1020 RGB pixels.

Mode 2:
Expanded - Each receiver card controls 4-pixel outputs. This can be used for pixels that have only one data line but no clock line (such as the WS2811 protocol). Thus, up to 510 RGB pixels per output can be used.

The maximum number of pixels per output is set via the PixLite 16 Long Range MkII.

Show description 
Differential price
From 8 piece » 17,99 €
19,99 €

including 19% VAT., plus shipping (Standard)

piece
Available now! (1 - 4 workdays)

Technical details:

  •   Voltage: 5V -30V DC
  •   max. Last: 15A/Bank
  •   Length: 62,20mm
  •   Width: 60,00mm
  •   Working temperature: -40 bis + 80 °C
  •   Pixel outputs: 2
  •   max. Pixel per output: 1,020 RGB-Pixel (765 RGBW-Pixel)

 


Attention this article only works in conjunction with the controller PixLite 16 Long Range MkI

  •   Advertising displays
  •   Control of Christmas lights
  •   AmbiLight
  •   Club lights
  •   Stage light
  •   1 Receiver (only work with PixLite Long Range Controller)
  user manual (EN)

 0  Ratings

Write your first review and help others with their purchase decision: